The NITRO-GEN generator was developed with Organomation’s nitrogen evaporators in mind to provide nitrogen generation for sample concentration. The generator is lightweight and easy to set up, requiring only a source of compressed air to run. This unit is an ideal choice for labs with an in-house compressed air source.
The generator uses a hollow-fiber membrane to convert compressed air to a stream of 95-99% pure nitrogen gas. The hollow-fiber membrane consists of a series of narrow, semipermeable tubes in a porous membrane. As compressed air travels through the fibers, oxygen and water vapor permeate the membrane and are vented off, leaving a steam of high purity nitrogen gas. At up to 99% purity, the resulting nitrogen gas stream can be used in a variety of sample preparation applications.
| Instrument Name | NITRO-GEN |
| Instrument Catalog Number | NA1955 |
| Flow Rate | Up to 20 L/min |
| Technology | Hollow-Fiber Membrane |
| Output Pressure | Adjustable 0 – 100 psi |
| Electrical Requirements | None |
| Total Wattage | N/A |
| Noise Level | Negligible (< 40 dBA when connected to an instrument) |
| Overall Dimensions (w x d x h) | 9.5 x 8 x 19.5 in 24.1 x 20.3 x 49.5 cm |
| Weight | 13.25 lbs. 6 kg |
| Warranty Term | 1 Year |
| Inlet Air Conditions | |
| Max Inlet Pressure | 150 psi 10.3 bar |
| Particulates | ≤ 0.01 µm |
| Max Oil Vapor Content | < 0.01 mg/m3 < 0.01 ppm (w) |
| Relative Humidity | < 100% (non-condensing) |
| Heating Device Specs | |
| Temperature | 36-122 °F 2-50 °C |
| Ambient Pressure | Atmospheric |
| Air Quality | Clean air without contaminants |
Search Product
